Highlights



























Description

These ball head pins made of 304 stainless steel are suitable for a wide range of DIY jewelry projects. Ball head pins are part of the basic equipment of every jewelry workshop. The lower head serves as the end piece. If the threading hole in the bead is too large, the first thing to do is put a bead cap on the pin. Once everything is threaded, cut off the end that protrudes by approx. 8 mm and bend it into an eyelet using round-nose pliers. This means you can also attach beads to a link chain. Your jewelry will look much higher quality and is suitable for special occasions.

Due to the nature of the material, the pins can be more or less bent, but this does not affect the function in any way.
The pen is 40 mm long and has a 2.0 mm head. The material thickness is 0.7 mm.

Thanks to the high-quality stainless steel, the pens are well protected from tarnishing and rusting. With good care and storage, you can enjoy your homemade jewelry for a very long time.

Please note: Due to the different screen settings, there may always be slight differences in color. We make every effort to present the item as true to the original as possible.